• SKIN PROTECT is a water-soluble, white, non-greasy and silicone-free skin cream which protects the skin with an elastic, non-slippery film
• Protects from stubborn dirt, e.g. soot, tar
• Especially suitable for work such as tyre repair, preparation for bonding, painting etc.

• SILK SKIN is a non water-soluble, silicone-free, slightly greasy protective skin-care cream with beeswax
• High-quality vegetable oils complemented with moisture-regulating ingredients keep the skin smooth and elastic
• Regular application after washing hands supports the natural resistance and regeneration of the skin
• Optional wall-mount dispenser available

• REMA TIP TOP CLEAN-UP is the cleaning paste to go
• Quickly removes even tough soiling from the hands without water - and is mild and gentle to the skin
• Simply put on and dry-rub off

• Excellent cleaning effect with normal soiling
• Pleasant, unobtrusive smell
• Practical, reusable dispenser
• Easy refilling with exchange bottle

• Contains vegetable oils
• Without additional solvents
• Extremely mild and gentle to the skin
• Does not clog drains or outlets
• Alkali-free and adapted to the pH of the skin
• With citric acid to preserve the skins natural resistance
• Extremely economical (approx. 2 grams are enough)

• With orange fragrance, removes even the toughest dirt such as soot, paint, printing ink, tar, bitumen, underseal etc.
• Hand Cleaner SUPER cleans down to the pores, is easy to rinse off, does not contain sand and therefore will not clog drains or outlets

• Efficient, cream formula hand cleaner which does not attack the skin
• Removes toughest soiling such as oil, grease, tar, resin, paint etc.
• Cleans with mild ingredients and very fine abrasive materials with no organic solvents
• Contains no sand and therefore does not clog outlets or drains
• Over 90 % of the ingredients are biodegradable

• Universal cleaner for tools, parts, vehicles, motors, gearboxes, nozzles, machines, tanks, tubes, shop floors etc.
• Can be applied by spraying, using a brush, dipping or wiping
• Wash down or rinse with tap water
• Note: Cold cleaners must be used only in conjunction with a separator for light liquids (oil trap)

• Universally usable high-pressure cleaner for cleaning motors, vehicles, shop floors etc.
• Excellent, gentle cleaning effect in conjunction with a high-pressure jet cleaner
• Economic usage
• Less waste, as one bucket of powder corresponds to approx. 120 litres of liquid cleaner
• Easy to open, relockable container

• For use in car wash installations/washing bays, high-pressure and steam jet cleaners
• Gently removes dirt from painted areas, rims etc. without attacking the surfaces
• The special formulation fights hard limescale build-up on the washing equipment
• Can be diluted to a ratio of 1:50 for use in car wash installations

• Very economical
• Thorough cleaning of the car's paintwork before waxing or just "in between"
• Free of solvents and phosphate

• Washing and conditioning all-in-one
• Hard wax components for long-time paint care
• Especially suitable for hand washing of door foldings and other areas not cleaned in the car wash
• With measuring cap for economic use
• 99 % biodegradable

• Suitable for all types of rims
• Removes even most stubborn soilings such as brake dust
• Extremely gentle to the surface
• Economic usage
• Best results are obtained in conjunction with a wheel brush
• Without acids and solvents
• 99 % biodegradable

• Universal cleaner for smooth surfaces such as plastic or glass
• Ideal for office, household and camping
• Cleans thoroughly, revives colours and surfaces
• Fights premature ageing

• Suitable for outside, unpainted plastic surfaces
• Gentle cleaning down to the pores
• Even removes polish residues

• For crystal clear vision
• Removes even stubborn soilings such as nicotine fogging, silicones and trim emissions from glass and transparent plastic
• Leaves no streaks at all

• For gentle cleaning of interior trim
• Removes even stubborn soilings such as nicotine residues and plasticisers
• Pleasant fragrance

• The perfect complement to the cockpit cleaner
• For care and protection of the interior trim
• Antistatic effect
• Gives the surface a satin finish and restores the original depth of colour

• For easy removal of insect traces
• Gentle to the surface
• Acts quickly and efficiently
• Biodegradable

• For car, household and shop usage
• Washable in boiling water, resistant to oil and petrol
• Large-pore texture with high capacity to absorb and expel water

Not just another de-icer for frozen door locks:

• Prevents freezing for up to four weeks when used in a preventive manner
• The high-quality oil components act also as a lubricant for the mechanical parts of the door lock

• ROCKET TYRE NEW gives tyres back their typical dark matt colour
• Perfect for second-hand car dealers, tyre service stations, garages, veteran car and bike museums
• Easy and uniform application using the integrated sponge

• Approved by MERCEDES-BENZ (trucks) and PORSCHE
• For fast, gentle and easy fitting and demounting of all standard tyre/rim combinations
• Chemically neutral with respect to rubber and metal
• Excellent lubrication for mounting and demounting operations = fewer injuries
• Promotes adhesion between rim and tyre, prevents tyre slippage
• Non-spattering

• Facilitates mounting and demounting of extremely wide tyres on standard tyre changers
• Increased lubrication at the beginning of the mounting operation
• Fast-drying and non-spattering

• Durably seals minor leaks where the bead is seated on the rim
• Proven tyre mounting paste with additional bead sealing properties
• Ideal for mounting retreads or tyres on old rims

• For all standard mounting applications on two-wheel vehicle and car tyres
• Becomes transparent when dry

• For all standard mounting applications to car and truck tyres
• Cost-effective for big order quantities

• Specially formulated for reliable and clean mounting of premium low-profile tyres and modern wheel systems such as PAX, RFT, SST and UHP (Ultra High Performance)
• Sprayable solution with high initial sliding effect which reduces the seating pressure
• Dries quickly, ensuring that the tyre is safely seated on the rim
• Reduces the risk of clogging pressure sensors on the wheel
• Economic usage, not harmful to the environment
• Transparent fluid, dries without leaving visible residues on tyre or wheel

• Demounting-Fluid with excellent flow properties for demounting tyres which are stuck on their rims
• Demounted tyre stays completely serviceable
• REMA TIP TOP Demounting-Fluid does not attack the rubber structure of the beads
• Free from mineral oil
• Extremely economical

Caution:
Because of its high lubricating effect, Demounting-Fluid must not be used for mounting purposes. The tyre may slip off the rim when rolling!

• For removing residue left by adhesive weights on the rim, or for pre-cleaning the weight placement areas on the rim
• REMAXX EXive has been specifically developed to remove residue without damaging modern rims
• Easy removal of previously softened up dirt using plastic scraper
• Neutral to rubber and metals

• Liquid mounting agent, especially for agricultural tyres
  Caution:
• Concentrate to be diluted with water at a ratio of 1:5

• Bead bonding agent on resin base
• Applied with a brush to the cleaned rim seat and tyre bead before mounting
• Do not additionally use a mounting agent such as mounting paste or mounting fluid
• The tyre is then mounted within up to 30 minutes before REMAXX ANTI-GLISS LUBE dries, leaving a viscous bonding coat

• Liquid lubricant for easy mounting of SE and SIT tyres
• Effective, long-lasting gliding film
• Reduces the pressure required to mount the tyre

• Spreadable sealant for sealing leaks caused by ageing or wear on the beads
• Applied to the bead and bead seat before the tyre is inflated
• During inflation the solid matter contained in the solution is pressed into the uneven areas and seals them

Safety instruction:

• As REMAXX BEAD SEALER is flammable, do not use it to fill the tyre
• Also do not use it to seal larger bead injuries caused during tyre mounting, cuts extending to the fabric etc.

• Can be used as a "flexible pump ring" for all tyre mounting operations
• Stiff paste with stable viscosity to seal the gap between tyre bead and rim edge

• The flat brush is especially suitable for mounting low-profile tyres
• Brushes with round head are excellent for application of mounting cream

• Fine-grained
• Asbestos free

• The thickness of the brush and the hardness of the bristles have a determining influence on the quality and economy of the coat of cement in the skive, on the inner liner and on the patch

• Can be painted or sprayed onto retreaded tyres to give the appearance of a new tyre

• Storage brushes and detergents

• Cleaning and preventing brushes from drying out
• For professional use only

* Labelled in accordance with EU regulations

• Prevents brushes from drying out
• Cleans away rubber solutions

• For even distribution of liquids on surfaces

• Loosens rusted or seized nuts, bolts, joints, hinges, switches, mechanical components

• Adhesive, all-purpose high temperature grease
• Especially suitable for components subject to high temperatures, e.g. disc brakes, brake cams and bolts, screwed connections, seals, flanges and dashboards
• Temperature application range from -30°C to +300°C
• Spray with environmentally friendly propellant

• For manifold use in cars, such as lubricant for seat rails, headrest, sliding roof
• Also suitable as assembly aid for tube connections
• Protection and care product for chromium, aluminium, plastic, leather and rubber parts
• Sliding agent for drawers, curtain rails, window and door locks in the household

• Clearly visible, high foam quality thanks to very stable, microporous foam
  
• Easy to use and reliable
  
• Instantly shows up leakages up to a flow rate of 0.0015 cm³/sec (even at a pressure of under 5 mbar)
  
• Detects the smallest leaks e.g. in gas and compressed air lines, pressurized tanks, pipes, valves and screw fittings
  

• Assembly aid for parts subject to corrosion, high temperatures and unfavourable environments, such as screws, bushes and valves
• Flanged joints and threaded tube connections
• Positive-locking components
• Temperature application range from -30 °C to +150 °C